Tel (NCSA): +1 513-666-4210
Tel (EMEA): +44 (0)1843 873300

[Discontinued] Audio Power Amplifier Port Expander for C2-2000 Switchers

SKU: S2-101AA
Stereo audio power amplifier that provides 10 watts RMS per channel into a 4 ohm load when signals from a pre-amplified source are provided as inputs.

PRODUCT DISCONTINUED:
The S2-101AA has been discontinued. If you need a S2-101AA for your project, please contact your sales representative.

S2-101AA Audio Power Amplifier is a stereo audio power amplifier that provides 10 watts RMS per channel into a 4 ohm load when signals from a pre-amplified source are provided as inputs.

This professional series amplifier operates with very low Total Harmonic Distortion (THD+N), very high Signal to Noise Ratio (S/N+N) plus Crosstalk is greatly minimized.Frequency Response is a very wide 20Hz to 24kHz and the inputs can be either balanced or unbalanced.

To prevent speaker damage, the unit has PopSuppression upon turn on. It also features short circuit and over temperature protection.

The S2-101AA provides for a wide range of input connections including RCA jacks, Mini-Combicon Terminal jacks and a 3.5mm single ended jack to accommodate PC audio inputs. The output connectors utilize spring loaded terminals for connection to external speakers.

Mechanical construction uses the same form factor as the companion S2 switcher products and the S2-101AA can be rack mounted using the optional RM-220 single/dual rack mount kit.

 

PRODUCT DISCONTINUED:
The S2-101AA has been discontinued. If you need a S2-101AA for your project, please contact your sales representative.

S2-101AA Audio Power Amplifier is a stereo audio power amplifier that provides 10 watts RMS per channel into a 4 ohm load when signals from a pre-amplified source are provided as inputs.

This professional series amplifier operates with very low Total Harmonic Distortion (THD+N), very high Signal to Noise Ratio (S/N+N) plus Crosstalk is greatly minimized.Frequency Response is a very wide 20Hz to 24kHz and the inputs can be either balanced or unbalanced.

To prevent speaker damage, the unit has PopSuppression upon turn on. It also features short circuit and over temperature protection.

The S2-101AA provides for a wide range of input connections including RCA jacks, Mini-Combicon Terminal jacks and a 3.5mm single ended jack to accommodate PC audio inputs. The output connectors utilize spring loaded terminals for connection to external speakers.

Mechanical construction uses the same form factor as the companion S2 switcher products and the S2-101AA can be rack mounted using the optional RM-220 single/dual rack mount kit.