Tel (NCSA): +1 513-666-4210
Tel (EMEA): +44 (0)1843 873300

[Discontinued] CORIO2 Universal Scaler/Switcher w/ PiP, Keying and HD/SD-SDI

SKU: C2-2255A
Provides versatile scaling, conversion and switching power for nearly any combination of analog and/or digital video inputs/outputs including SDI signals.

Discontinued NOTICE
The C2-2355A, C2-2255A & C2-2155A have been discontinued. Please see the C2-2655, C2-2755 and C2-2855 for replacements.  If you require a C2-2255A for your project, please contact your sales representative.

C2-2255A Video Switcher/Scaler provides high quality video conversion from Composite, S-Video (YC), YUV, YPbPr, RGB or DVI to analog RGB/YPbPr and DVI at virtually any resolution and refresh rate. NTSC, PAL, PAL-M, PAL-N, SECAM input standards are supported. HD/SD/SDI input is supported as well. 

Input Expansion is possible by using the optional S2 Series Input Expansion Switchers for SD/HD-SDI, DVI, RGB, YPbPr, YUV, Composite or YC. These units link to C2 unit via an OPTIONS Interconnect Cable and become an integral part of the main unit from a control and operational standpoint. The routing of these additional inputs is controlled directly from the control system of the C2 unit and multiple different S2 models may be simultaneously connected.

Basic Stereo Audio switching is provided by an integral 4x1 audio routing switcher. The four impedance-independent, unbalanced inputs follow the video input selection. A rear panel terminal block provides input and output access.

 

 

Discontinued NOTICE
The C2-2355A, C2-2255A & C2-2155A have been discontinued. Please see the C2-2655, C2-2755 and C2-2855 for replacements.  If you require a C2-2255A for your project, please contact your sales representative.

C2-2255A Video Switcher/Scaler provides high quality video conversion from Composite, S-Video (YC), YUV, YPbPr, RGB or DVI to analog RGB/YPbPr and DVI at virtually any resolution and refresh rate. NTSC, PAL, PAL-M, PAL-N, SECAM input standards are supported. HD/SD/SDI input is supported as well. 

Input Expansion is possible by using the optional S2 Series Input Expansion Switchers for SD/HD-SDI, DVI, RGB, YPbPr, YUV, Composite or YC. These units link to C2 unit via an OPTIONS Interconnect Cable and become an integral part of the main unit from a control and operational standpoint. The routing of these additional inputs is controlled directly from the control system of the C2 unit and multiple different S2 models may be simultaneously connected.

Basic Stereo Audio switching is provided by an integral 4x1 audio routing switcher. The four impedance-independent, unbalanced inputs follow the video input selection. A rear panel terminal block provides input and output access.